LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 920 (Automatic Transmission - ALLISON - Removal & Installation, Service, Overhaul, Troubleshooting & Diagnosis) >> Off-Vehicle Repair Instructions >> 1-2-3-4 and 4-5-6 Clutch Housing Bushing Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2007 GMC Sierra and 2007 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of 1-2-3-4, 4-5-6 Clutch Housing Bushing
    GM1217085Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: DO NOT score the 1-2-3-4, 4-5-6 clutch housing bore when removing the clutch housing bushing.
  1. Gently tap the bushing through the inside of the 1-2-3-4, 4-5-6 clutch housing until the bushing becomes dislodged.
  2. Remove the bushing (2) from the 1-2-3-4, 4-5-6 clutch housing (1).
  3. Remove any nicks or burrs with a crocus cloth.
scientia non olet · About LEMON Manuals