Component Testing
WARNING: This page is about a different car, the 2007 GMC Sierra and 2007 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.
- Ignition OFF, disconnect the harness connector at the seat adjuster switch.
- Test for infinite resistance between each seat direction signal terminal and the switch B+ terminal with the switch in the open position.
- If less than infinite resistance, replace the switch.
- Test for less than 1 ohm of resistance between each seat direction signal terminal and the B+ terminal with the switch in the closed position.
- If greater than 1 ohm, replace the switch.