LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 906 (Engine Mechanical - 4.8L, 5.3L, 6.0L And 6.2L (2 Of 5)) >> On-Vehicle Repair Instructions (1 Of 2) >> Engine Rear Cover Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2007 GMC Sierra and 2007 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Oil Pan-To-Rear Cover Bolts
    GM680413Courtesy of GENERAL MOTORS CORP.
  1. Remove the automatic transmission flexplate, refer to Automatic Transmission Flex Plate Replacement .
  2. Remove the oil pan-to-rear oil seal housing bolts (1).
    3. Fig 2: View of Rear Housing, Gasket & Seal
    GM1552544Courtesy of GENERAL MOTORS CORP.
  3. Remove the rear oil seal housing bolts (517).
  4. Remove the rear oil seal housing (518) and gasket (519). Discard the gasket.
  5. Remove and discard the rear oil seal (141).
scientia non olet · About LEMON Manuals