Repair Procedure

WARNING: This page is about a different car, the 2007 GMC Sierra and 2007 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Assist Lever In Forward Position

Courtesy of GENERAL MOTORS CORP.

IMPORTANT: Ensure that the dress cover and connector body are both in the released position before reassembling. Failure to do so may cause damage to the connector and component.

Use the appropriate terminal and follow the instructions in the J-38125 . See Special Tools .

Location of the terminal in the repair tray and the proper crimp tool can be found in the appropriate connector end view.