Removal Procedure

WARNING: This page is about a different car, the 2007 GMC Sierra and 2007 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Radiator, Inlet & Outlet Hose & Clamps

Courtesy of GENERAL MOTORS CORP.

Disengage the radiator inlet hose clip (2) at the fan shroud.

Fig 2: View Of Surge Tank Inlet Hose & Clamp

Courtesy of GENERAL MOTORS CORP.

If necessary, reposition the surge tank inlet hose clamp at the radiator.
If necessary, remove the surge tank inlet hose from the radiator.

Fig 3: Cooling Fan Electrical Connectors

Courtesy of GENERAL MOTORS CORP.

Disconnect the electrical connectors from the cooling fans.
Remove the clip attaching the wiring harness to the shroud.
Remove transmission cooler lines bolts from fan shroud.

Fig 4: Engine Oil Cooler Quick Connect Fittings

Courtesy of GENERAL MOTORS CORP.

If necessary, open the engine oil cooler line clip and remove the cooler lines from the clip.

Fig 5: Cooling Fan Shroud & Bolts

Courtesy of GENERAL MOTORS CORP.

Remove the cooling fan shroud bolts.
Remove the cooling fan and shroud.