Seat Belt Replacement - Center Rear (Crew Cab)

WARNING: This page is about a different car, the 2007 GMC Sierra and 2007 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Seat Belt - Center Rear (Crew Cab)

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure: Remove rear bench seat. Refer to Rear Seat Replacement (Extended Cab with RPO AM7) or Rear Seat Replacement (Extended Cab with RPO A68) or Rear Seat Replacement (Crew Cab with RPO A68) .
1	Rear Center Seat Belt Anchor Plate Nut NOTE: Refer to Fastener Notice . Tighten: 45 N.m (33 lb ft)
2	Rear Center Seat Belt Guide
3	Rear Center Seat Belt Retractor Bolt Tighten: 45 N.m (33 lb ft)
4	Rear Center Seat Belt Assembly Tip: Route seat belt through guide on body rear inner panel.
5	Rear Seat Center Bracket Nut Tighten: 45 N.m (33 lb ft)
6	Rear Seat Center Bracket