Rear Seat Back Recliner Cover Replacement (Extended Cab with A68)

WARNING: This page is about a different car, the 2007 GMC Sierra and 2007 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Rear Seat Recliner Inner Finish Cover, Screws & Retainer Clips

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedures Remove the rear seat. Refer to Rear Seat Replacement (Extended Cab with RPO AM7) or Rear Seat Replacement (Extended Cab with RPO A68) or Rear Seat Replacement (Crew Cab with RPO A68) . Separate the rear split bench seat. Refer to Rear Seat Separation (Extended Cab w/A68) .
1	Rear Seat Recliner Inner Finish Cover Screw NOTE: Refer to Fastener Notice . Tighten: 2 N.m (18 lb ft)
2	Rear Seat Recliner Inner Finish Cover Tip: Pull away from seat to disengage the retainers.
3	Rear Seat Recliner Inner Finish Cover Retainer Clip (Qty: 2)