LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 699 (Rear Suspension System) >> Repair Instructions >> Rear Axle Lower Control Arm Bushing Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2007 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Bushing, Lower Control Arm, Nut & J 45097
    GM932566Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: Apply high pressure lube to the threads of the tool.
  1. Install a new bushing from the opposite direction.
  2. Using the J 45097  , reverse the tool layout from the removal procedure. See Special Tools .
  3. Tighten the nut until the bushing is fully installed.
  4. Install the lower control arm. Refer to Rear Axle Lower Control Arm Replacement .
scientia non olet · About LEMON Manuals