LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 256 (Interior Trim) >> Repair Instructions >> Garnish Molding Replacement - Upper Pillar >> Removal Procedure

Removal Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2003 GMC Savana Special, 2003 GMC Savana Camper Special, 2003 GMC Savana, 2003 Chevrolet RV Cutaway, and 2003 Chevrolet Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the front seat belt from the front seat belt height adjuster. Refer to SEAT BELT RETRACTOR REPLACEMENT - FRONT .
  2. Grasp and gently pull the garnish molding in order to release the retaining clips.
  3. Remove the front door upper pillar garnish molding from the vehicle.
  4. Inspect the front door upper pillar garnish molding for broken or missing retaining clips.
    Fig 1: Removing Upper Pillar Garnish Molding
    G02423361Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals