LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 256 (Interior Trim) >> Repair Instructions >> Garnish Molding Replacement - Upper Pillar >> Installation Procedure

Installation Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2003 GMC Savana Special, 2003 GMC Savana Camper Special, 2003 GMC Savana, 2003 Chevrolet RV Cutaway, and 2003 Chevrolet Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the front door upper pillar garnish molding to the vehicle.
  2. Align the retainers to the body and press the garnish molding in order to engage the retaining.
  3. Install the front seat belt to the front seat belt height adjuster. Refer to SEAT BELT RETRACTOR REPLACEMENT - FRONT .
    Fig 1: Installing Upper Pillar Garnish Molding
    G02423362Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals