LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 256 (Interior Trim) >> Repair Instructions >> Garnish Molding Replacement - Lower Pillar >> Installation Procedure

Installation Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2003 GMC Savana Special, 2003 GMC Savana Camper Special, 2003 GMC Savana, 2003 Chevrolet RV Cutaway, and 2003 Chevrolet Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the front door lower pillar garnish molding to the vehicle.
  2. Press on the front door lower pillar garnish molding in order to engage the retaining clips.
  3. Install the seat belt through the slot in the front door lower pillar garnish molding.
  4. Install the front door upper pillar garnish molding. Refer to Garnish Molding Replacement - Upper Pillar .
  5. Install the 2 screws to secure the garnish molding.
    Fig 1: Installing Lower Pillar Garnish Molding
    G02423364Courtesy of GENERAL MOTORS CORP.