LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 256 (Interior Trim) >> Repair Instructions >> Garnish Molding Replacement - Body Side Rear Upper >> Removal Procedure

Removal Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2003 GMC Savana Special, 2003 GMC Savana Camper Special, 2003 GMC Savana, 2003 Chevrolet RV Cutaway, and 2003 Chevrolet Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the upper pillar garnish molding. Refer to Garnish Molding Replacement - Upper Pillar .
  2. Grasp and pull the upper pillar garnish molding away from the body in order to release the clips.
  3. Remove the upper pillar garnish molding from the vehicle.
  4. Inspect the front door upper pillar garnish molding for broken or missing clips.
    Fig 1: Removing Body Side Rear Upper Garnish Molding
    G02423369Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals