Removal Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2003 GMC Savana Special, 2003 GMC Savana Camper Special, 2003 GMC Savana, 2003 Chevrolet RV Cutaway, and 2003 Chevrolet Cutaway. However, it is still accessible from the selected car via links, so may be relevant.

Apply masking tape to the body side border of the molding in order to protect the body from scratches. The tape will also aid in aligning the molding during installation.

Fig 1: Applying Masking Tape To Body Side Border Of Molding
Courtesy of GENERAL MOTORS CORP.
Use the J 41409 or a 0.8 mm (0.03 in) fishing line in order to cut through the adhesive material.

Fig 2: Cutting Adhesive Material
Courtesy of GENERAL MOTORS CORP.