Installation Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2003 GMC Savana Special, 2003 GMC Savana Camper Special, 2003 GMC Savana, 2003 Chevrolet RV Cutaway, and 2003 Chevrolet Cutaway. However, it is still accessible from the selected car via links, so may be relevant.

Align the knee bolster bracket (2) to the I/P.
CAUTION: Refer to FASTENER NOTICE .
Install the nuts (1).
Tighten

Tighten the nuts (1) to 10 N.m (88 lb in).
Install the knee bolster trim panel. Refer to Knee Bolster Replacement - Right

Fig 1: Removing Knee Bolster Bracket - Right
Courtesy of GENERAL MOTORS CORP.