Scan Tool Output Controls
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2003 GMC Savana Special, 2003 GMC Savana Camper Special, 2003 GMC Savana, 2003 Chevrolet RV Cutaway, and 2003 Chevrolet Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
Scan Tool Output Controls
| Scan Tool Output Control | Additional Menu Selection(s) | Description |
|---|---|---|
| Lamp Test | Displays Test | The IPC illuminates all of the display segments you select On. |
| IPC Gauges | Displays Test | The IPC drives all gages to the maximum physical position when you select On. The IPC drives all gages to the minimum physical position when you select Off |
| PRNDL Display | Displays Test | The IPC illuminates the PRNDL when you select On. |
Powertrain Control Module (PCM)
| Scan Tool Output Control | Additional Menu Selection(s) | Description |
|---|---|---|
| Engine Output Controls | Fuel Gauge | The PCM drives the fuel gage to the maximum physical position when you select On. The PCM drives the fuel gage to the minimum physical position when you select Off. |
| Engine Output Controls | Malfunction Indicator Lamp (MIL) | The PCM commands the MIL On and Off |
| Engine Output Controls | Oil Life Reset | The PCM resets the oil life monitor to the desired percent. |