LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 232 (Engine Cooling System) >> Repair Instructions >> Radiator Hose Replacement - Inlet >> Removal Procedure

Removal Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2003 GMC Savana Special, 2003 GMC Savana Camper Special, 2003 GMC Savana, 2003 Chevrolet RV Cutaway, and 2003 Chevrolet Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
  1. Partially drain the cooling system. Refer to Draining and Filling Cooling System .
  2. Reposition the clamp at the radiator inlet using the J 38185  .
  3. Reposition the clamp at the thermostat housing using the J 38185  .
  4. Remove the radiator inlet hose from the radiator.
  5. Remove the radiator inlet hose from the thermostat housing.
  6. Remove the radiator inlet hose (5).
  7. Fig 1: Removing Radiator Inlet Hose
    G02079122Courtesy of GENERAL MOTORS CORP.