Rear Side Door Wiring Conduit Replacement

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 GMC Yukon XL, 2012 GMC Yukon, 2012 Chevrolet Tahoe, 2012 Chevrolet Suburban, and 2012 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Rear Door Conduit Grommet & Electrical Connectors

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
1	Electrical Connectors Procedure Mark the location and the color of the wires to the electrical socket before removing the wires. Disconnect the door wiring harness electrical connector from the body harness. Remove the wiring harness wiring one at a time from the conduit. Remove the wiring harness from the rubber conduit.
2	Rear Door Conduit Grommet

Callout

Component Name

Electrical Connectors

Procedure

Mark the location and the color of the wires to the electrical socket before removing the wires.
Disconnect the door wiring harness electrical connector from the body harness.
Remove the wiring harness wiring one at a time from the conduit.
Remove the wiring harness from the rubber conduit.

Rear Door Conduit Grommet