LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 187 (Disc Brakes) >> Removal & Installation >> Brake Caliper Brackets >> Removal (Front)

Removal (Front)

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2003 GMC Savana Special, 2003 GMC Savana Camper Special, 2003 GMC Savana, 2003 Chevrolet RV Cutaway, and 2003 Chevrolet Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the caliper from the mounting bracket and support the caliper with heavy mechanic's wire or equivalent. DO NOT disconnect the hydraulic brake flexible hose from the caliper. See BRAKE CALIPERS  .
  2. Remove the brake pads. Remove the anti-rattle clips from the brake caliper bracket.
  3. Remove the brake caliper bracket mounting bolts. Remove the brake caliper bracket. Remove any contaminants or foreign material from the inside ends of the brake caliper bracket. Clean the mounting surface and threads of the brake caliper bracket.
scientia non olet · About LEMON Manuals