LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1800 (Transfer Case - Mp 3023/3024-NQH) >> Repair Instructions - Off Vehicle >> Transfer Case Assemble >> Shift Fork Assembly, and Rear Output Shaft Assembly Installation

Shift Fork Assembly, and Rear Output Shaft Assembly Installation

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2011 GMC Yukon XL, 2011 GMC Yukon, 2011 Chevrolet Tahoe, 2011 Chevrolet Suburban, and 2011 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Shift Fork Assembly And Rear Output Shaft
GM1849368Courtesy of GENERAL MOTORS CORP.
Shift Fork Assembly, and Rear Output Shaft Assembly Installation

Callout Component Name
Preliminary Procedure 
Load all 3 components simultaneously.
1 Transfer Case High/Low Shift Fork Assembly
2 Transfer Case High/Low Clutch
3 Transfer Case Rear Output Shaft Assembly