LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1740 (Automatic Transmission - ALLISON - DTC P0880 To DTC P2771) >> DTC P2771 >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different car, the 2010 GMC Sierra, 2010 GMC Cab & Chassis Sierra, 2010 Chevrolet Silverado, and 2010 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition ON, place the transfer case shift control switch in the 2 HI position. Verify the 2 high indicator light on the switch is ON and not flashing.
  2. Ignition ON, transmission in Neutral, observe the scan tool TCM 4WD Low parameter. The parameter should change from Disabled, to Enabled when selecting the 4 Low position and the 4WD low indicator light is ON and not flashing.
  3. Operate the vehicle within the Conditions for Running the DTC to verify the DTC does not reset. You may also operate the vehicle within the conditions that you observed from the Freeze Frame/Failure Records data.
scientia non olet · About LEMON Manuals