LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1739 (Automatic Transmission - ALLISON - Repair Instructions - Off Vehicle) >> Repair Instructions - Off Vehicle >> Intermediate Carrier Assembly Assemble

Intermediate Carrier Assembly Assemble

WARNING: This page is about a different car, the 2010 GMC Sierra, 2010 GMC Cab & Chassis Sierra, 2010 Chevrolet Silverado, and 2010 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Intermediate Carrier Assembly & Output Carrier Internal Gear
    GM1217959Courtesy of GENERAL MOTORS CORP.
  1. Position the output carrier internal gear (3) on the work table so that the outer splines are facing down.
  2. Install the intermediate carrier assembly (2) into the output carrier internal gear (3). Make sure the splines are engaged.
  3. Install the retaining ring (1) into the output carrier internal gear (3) so that the intermediate carrier assembly is retained.