Manual Downshifts
WARNING: This page is about a different car, the 2010 GMC Sierra, 2010 GMC Cab & Chassis Sierra, 2010 Chevrolet Silverado, and 2010 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
- Place the shift selector in DRIVE.
- Accelerate the vehicle to obtain SIXTH range.
- Place the shift selector in RANGE SELECTION MODE (M).
- By pressing the "+/-" button on the shift selector select the desired preselect range.
- Release the throttle.
- Verify the following conditions:
- The TCC releases.
- The transmission downshifts immediately to the preselected range. Downshifts will occur in sequence to the preselect range.
- The engine slows the vehicle.