No Torque Converter Clutch Apply

WARNING: This page is about a different car, the 2010 GMC Sierra, 2010 GMC Cab & Chassis Sierra, 2010 Chevrolet Silverado, and 2010 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.

Checks	Causes
Torque Converter Assembly (1)	Diagnose torque converter for possible internal damage. Refer to Torque Converter Diagnosis .
Fluid Pump Cover Assembly (219)	Inspect for worn, damaged, or sticking converter feed limit valve (220) and spring (221). Inspect for worn, damaged, or sticking TCC control valve (227) and spring (226). Inspect for damaged stator shaft.
Control Valve Lower Body Assembly (307)	Inspect for worn, damaged, or sticking torque converter clutch (TCC) regulator apply valve (355). Refer to Control Solenoid Valve and Transmission Control Module Assembly Inspection .
4-5-6 (with Turbine Shaft) Clutch Assembly (56)	Inspect for damaged turbine shaft. Inspect for damaged turbine shaft O-ring seal.
Torque Converter (with Fluid Pump) Housing Assembly (2)	Inspect for leaking or damaged torque converter fluid seal assembly (201), torque converter bushing (206), turbine shaft o-ring seal (443) and torque converter (with fluid pump) housing assembly (2).