LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1730 (Automatic Transmission - 4L60-E/4L65-E/4L70-E - Repair Instructions - Off Vehicle) >> Repair Instructions - Off Vehicle >> Manual Shift Detent Lever with Shaft Position Switch Assembly and Park Pawl Actuator Removal

Manual Shift Detent Lever with Shaft Position Switch Assembly and Park Pawl Actuator Removal

WARNING: This page is about a different car, the 2010 GMC Sierra and 2010 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Manual Shift Detent Lever with Shaft Position Switch Assembly Components
    GM2035543Courtesy of GENERAL MOTORS CORP.
  1. Remove the following parts:
    1. Manual valve link (89)
    2. Manual shift detent lever hub pin (92) discard, do not reuse
    3. Manual shift detent lever with shaft position switch assembly (88)
    4. Parking lock actuator assembly (85)
    5. Manual shaft (84)
      6. Fig 2: Removing Manual Shaft Seal
      GM59273Courtesy of GENERAL MOTORS CORP.
    6. Remove the manual shaft seal (82) with a screwdriver.
    2. Fig 3: View Of Parking Lock Bracket & Bolt
    GM284393Courtesy of GENERAL MOTORS CORP.
  2. Remove the following components:
    1. The parking lock bracket bolt (87)
    2. The parking lock bracket (86)
scientia non olet · About LEMON Manuals