Current Fault
WARNING: This page is about a different car, the 2010 GMC Sierra and 2010 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.
This display indicates an internal ATFP control module fault exists, no external circuits are involved. Replace the ATFP control module.
Unable to Start
- This display indicates the ATFP control module has monitored motor current of more than 20 A during motor start-up.
- Inspect for the following conditions:
- Automatic transmission fluid pressure trapped internally
- Poor terminal connection or wiring degradation
- External indication of ATFP pump motor damage
- If none of the conditions are observed, replace the ATFP motor/pump assembly and the ATFP control module.