Intake Manifold Removal - Left Side

WARNING: This page is about a different car, the 2010 GMC Sierra, 2010 GMC Cab & Chassis Sierra, 2010 Chevrolet Silverado, and 2010 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.

Tools Required

J 37228 Seal Cutter. See Special Tools .

Fig 1: View Of Intake Manifold (Left)

Courtesy of GENERAL MOTORS CORP.

Remove the left intake manifold bolts. Do not forget to remove the bolt inside the intake manifold tube.
Separate the intake manifold from the cylinder head using J 37228 . See Special Tools .
Remove the left intake manifold.