LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1680 (Engine Mechanical - 6.6L (LMM) - Repair Instructions - Off Vehicle (1 Of 3)) >> Generator and Drive Belt Tensioner Bracket Removal

Generator and Drive Belt Tensioner Bracket Removal

WARNING: This page is about a different car, the 2010 GMC Sierra, 2010 GMC Cab & Chassis Sierra, 2010 Chevrolet Silverado, and 2010 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Electrical Harness Clip Bolts
    GM1334907Courtesy of GENERAL MOTORS CORP.
  1. Remove the electrical harness clip bolts.
    2. Fig 2: View Of Drive Belt Tensioner
    GM1334909Courtesy of GENERAL MOTORS CORP.
  2. Remove the drive belt tensioner bolt.
  3. Remove the drive belt tensioner.
    4. Fig 3: View Of Generator Mounting Bracket
    GM1334912Courtesy of GENERAL MOTORS CORP.
  4. Remove the drive belt tensioner and generator mounting bracket bolts.
  5. Remove the drive belt tensioner and generator mounting bracket.
scientia non olet · About LEMON Manuals