LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1678 (Engine Mechanical - 6.6L (LMM) - Repair Instructions - On Vehicle) >> Intake Manifold Cover Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2010 GMC Sierra, 2010 GMC Cab & Chassis Sierra, 2010 Chevrolet Silverado, and 2010 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Intake Manifold Cover
    GM1334378Courtesy of GENERAL MOTORS CORP.
  1. Loosen the intake manifold cover clamp (1) at the resonator.
  2. Loosen the intake manifold cover bolt (2).
  3. Remove the intake manifold cover.
scientia non olet · About LEMON Manuals