Camshaft Position Sensor Replacement (With Actuator)
WARNING: This page is about a different car, the 2010 GMC Sierra, 2010 Chevrolet Silverado, and 2010 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
Camshaft Position Sensor Replacement (With Actuator)
| Callout | Component Name |
|---|---|
| Preliminary Procedures Remove the water pump. Refer to WATER PUMP REPLACEMENT (V8) |
|
| 1 | Camshaft Position Sensor Fastener (Qty: 3)
CAUTION:
Refer to FASTENER CAUTION . Tighten 12 N.m (106 lb in) |
| 2 | Camshaft Position Sensor Procedure Disconnect the electrical connectors. |