LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1621 (Transfer Case - Mp 1222/1225/1226-NQG) >> Description and Operation >> Transfer Case Description and Operation >> MP 1222/1225/1226 Build Variations

MP 1222/1225/1226 Build Variations

WARNING: This page is about a different car, the 2010 GMC Sierra, 2010 GMC Cab & Chassis Sierra, 2010 Chevrolet Silverado, and 2010 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.

The NQG transfer case is available in 6 variations, depending on the engine and transmission configurations. The variations allow the transfer case to handle different torque loads. When servicing the transfer case it is important to understand which variation is being serviced because of the different internal components.

MP 1222/1225/1226 Variations

Model Transmission Input Shaft Output Shaft Chain Size Chain Series Hi/Low Planetary Application
MP 1222
Light Duty (LD)
M30 - 4L60-E 27T
Spline
32T
Spline
7/16 X 1.25 in 9600 Series Rocker Pin Chain 3 Pinion K1
MP 1222 Light Duty (LD) MYC - 6L80 32T
Spline
32T
Spline
7/16 X 1.25 in 9600 Series Rocker Pin Chain 3 Pinion K1
MP 1225
Heavy Duty (HD - Canadian)
MYD - 6L90 29T
Spline
31T
Spline
7/16 X 1.5 in 2300 Series Round Pin Chain 5 Pinion K2
MP 1225
Heavy Duty (HD)
MYD - 6L90 29T
Spline
31T
Spline
7/16 X 1.5 in 9600 Series Rocker Pin Chain 5 Pinion K2
MP 1225
Heavy Duty (HD-Canadian)
MYD - 6L90 29T
Spline
31T
Spline
7/16 X 1.5 in 2300 Series Round Pin Chain 5 Pinion K2
MP 1226
Super Heavy Duty (SHD)
MYD - 6L90
MW7 - Allison
29T
Spline
31T
Spline
7/16 X 1.5 in 2300 Series Round Pin Chain 5 Pinion K2, K3