LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1613 (Automatic Transmission - ALLISON - Repair Instructions - On Vehicle) >> Repair Instructions - On Vehicle >> Transmission Fluid Auxiliary Cooler Replacement (LMM Diesel) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2010 GMC Sierra, 2010 GMC Cab & Chassis Sierra, 2010 Chevrolet Silverado, and 2010 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Transmission Fluid Auxiliary Cooler
    GM2043518Courtesy of GENERAL MOTORS CORP.
  1. Install the auxiliary oil cooler to the vehicle (2).
    2. CAUTION: Refer to Fastener Caution .
  2. Install the auxiliary oil cooler bolts (1).

    Tighten:  Tighten the bolts to 12 N.m (106 lb in).

  3. Connect the transmission oil cooler lines to the auxiliary cooler. Refer to Transmission Fluid Cooler Hose/Pipe Replacement .
  4. Install the radiator grille. Refer to Radiator Grille Replacement (Chevrolet) or Radiator Grille Replacement (GMC) or Radiator Grille Replacement (Chevrolet HD) or Radiator Grille Replacement (GMC HD) .
  5. Check and add transmission fluid as necessary.
scientia non olet · About LEMON Manuals