LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1591 (Power Steering System) >> Repair Instructions >> Power Steering Fluid Cooler Replacement (Without Hydroboost) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2010 GMC Sierra, 2010 GMC Cab & Chassis Sierra, 2010 Chevrolet Silverado, and 2010 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the radiator grille. Refer to Radiator Grille Replacement (Chevrolet) or Radiator Grille Replacement (GMC) or Radiator Grille Replacement (Chevrolet HD) or Radiator Grille Replacement (GMC HD) .
  2. Remove as much power steering fluid as possible from the power steering fluid reservoir.
  3. Place drain pans under the vehicle as needed.
    4. Fig 1: View Of Power Steering Pump & Components
    GM1861214Courtesy of GENERAL MOTORS CORP.
    CAUTION: Refer to Power Steering Hose Disconnected Caution .
  4. Disconnect the power steering gear outlet hose (2) from the power steering fluid cooler (4).
  5. Disconnect the power steering fluid cooler hose (3) from the power steering pump (1).
    6. Fig 2: View Of Power Steering Cooler & Bolts
    GM686121Courtesy of GENERAL MOTORS CORP.
  6. Remove the power steering fluid cooler bolts (2) from the power steering fluid cooler (1).
  7. Remove the power steering fluid cooler from the vehicle.
scientia non olet · About LEMON Manuals