Front Wheel Hub, Bearing, and Seal Replacement (1500)

WARNING: This page is about a different car, the 2010 GMC Sierra, 2010 GMC Cab & Chassis Sierra, and 2010 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Front Wheel Hub, Bearing, & Seal (1500)

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle . Remove the brake rotor. Refer to Front Brake Rotor Replacement (JD9, JF3, JF7, JG4) or Front Brake Rotor Replacement (JH6, JH7) . Remove the speed sensor, if equipped. For hybrid vehicles, refer to Front Wheel Speed Sensor Replacement . For non-hybrid vehicles, refer to Front Wheel Speed Sensor Replacement . For vehicles equipped with 4WD, remove the wheel drive shaft from the wheel bearing and hub assembly. Refer to Wheel Drive Shaft Replacement (2500) or Wheel Drive Shaft Replacement (1500) .
1	Wheel Bearing and Hub Bolt (Qty: 3) CAUTION: Refer to Fastener Caution . Tighten: 180 N.m (133 lb ft)
2	Wheel Hub and Bearing Assembly Tip: New wheel bearing comes with a wheel speed sensor installed.

Callout

Component Name

Preliminary Procedure

Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
Remove the brake rotor. Refer to Front Brake Rotor Replacement (JD9, JF3, JF7, JG4) or Front Brake Rotor Replacement (JH6, JH7) .
Remove the speed sensor, if equipped.
- For hybrid vehicles, refer to Front Wheel Speed Sensor Replacement .
- For non-hybrid vehicles, refer to Front Wheel Speed Sensor Replacement .
For vehicles equipped with 4WD, remove the wheel drive shaft from the wheel bearing and hub assembly. Refer to Wheel Drive Shaft Replacement (2500) or Wheel Drive Shaft Replacement (1500) .

Wheel Bearing and Hub Bolt (Qty: 3)

CAUTION: Refer to Fastener Caution .

Tighten: 180 N.m (133 lb ft)

Wheel Hub and Bearing Assembly
Tip: New wheel bearing comes with a wheel speed sensor installed.