Driver or Passenger Seat Back Ventilation Heating and Cooling Blower Replacement (Denali with KB6)
WARNING: This page is about a different car, the 2010 GMC Sierra, 2010 GMC Cab & Chassis Sierra, 2010 Chevrolet Silverado, and 2010 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
| Callout | Component Name |
|---|---|
| 1 | Front Seat Back Cushion Finish Panel Procedure: Using a nylon flat-bladed tool push the tabs in on the side of the panel to release from the seat back to remove. |
| 2 | Front Seat Back Blower Push in Retainer |
| 3 | Front Seat Back Blower Rivet (Qty: 2) Procedure: Drill out the old rivets and install new rivets when replacing the blower assembly. |
| 4 | Front Seat Back Blower Assembly Procedure: Disconnect the electrical connector. |