LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1539 (Engine Cooling System - Non-Hybrid) >> Repair Instructions >> Turbocharger Coolant Bypass Valve Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2010 GMC Sierra, 2010 GMC Cab & Chassis Sierra, 2010 Chevrolet Silverado, and 2010 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Turbocharger Bypass Valve And Coolant Inlet Hose Clamp
    GM2406312Courtesy of GENERAL MOTORS CORP.
  1. Remove the intake manifold cover. Refer to Intake Manifold Cover Replacement .
  2. Drain the cooling system. Refer to Cooling System Draining and Filling (Vac-N-Fill)  or Cooling System Draining and Filling (Static Fill) .
  3. Reposition the coolant inlet hose clamp (2).
  4. Disconnect the turbocharger coolant inlet hose from the turbocharger bypass valve (1).
    5. Fig 2: View Of Turbocharger Bypass Valve & Washer
    GM687052Courtesy of GENERAL MOTORS CORP.
  5. Remove the turbocharger bypass valve and washer.
scientia non olet · About LEMON Manuals