Installation Procedure

WARNING: This page is about a different car, the 2009 GMC Sierra, 2009 GMC Cab & Chassis Sierra, 2009 Chevrolet Silverado, and 2009 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Transmission Fluid Auxiliary Cooler

Courtesy of GENERAL MOTORS CORP.

Install the auxiliary oil cooler to the vehicle (2).

CAUTION: Refer to Fastener Caution .

Install the auxiliary oil cooler bolts (1).
Tighten: Tighten the bolts to 12 N.m (106 lb in).
Connect the transmission oil cooler lines to the auxiliary cooler. Refer to Transmission Fluid Cooler Hose/Pipe Replacement .
Install the radiator grille. Refer to Radiator Grille Replacement (Chevrolet) or Radiator Grille Replacement (GMC) .
Check and add transmission fluid as necessary.