LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1355 (Automatic Transmission - ALLISON - Removal & Installation, Service, Overhaul, Troubleshooting & Diagnosis) >> Repair Instructions - Off Vehicle >> Output Shaft Thrust Bearing Race Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2009 GMC Sierra, 2009 GMC Cab & Chassis Sierra, 2009 Chevrolet Silverado, and 2009 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Output Carrier Assembly Bearing Race
    GM1217233Courtesy of GENERAL MOTORS CORP.
  1. Position the output carrier assembly (3) on the press so that the rear of the carrier is facing up.
  2. Install a new bearing race into J 43797:  installer (1).
  3. Using J 43797:  installer (1), press the bearing race (2) onto the output carrier assembly (3) until J 43797:  installer seats.
scientia non olet · About LEMON Manuals