LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1355 (Automatic Transmission - ALLISON - Removal & Installation, Service, Overhaul, Troubleshooting & Diagnosis) >> Repair Instructions - Off Vehicle >> 1-2-3-4 and 4-5-6 Clutch Housing Reluctor Wheel Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2009 GMC Sierra, 2009 GMC Cab & Chassis Sierra, 2009 Chevrolet Silverado, and 2009 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Stakes On 1-2-3-4, 4-5-6 Clutch Housing
    GM1217087Courtesy of GENERAL MOTORS CORP.
  1. Grind the stakes from the 1-2-3-4, 4-5-6 clutch housing (1).
    2. Fig 2: Removing 1-2-3-4, 4-5-6 Clutch Housing Tone Wheel
    GM1217088Courtesy of GENERAL MOTORS CORP.
  2. Position the 1-2-3-4, 4-5-6 clutch housing (2) on a press so that the front of the housing is down.
  3. Install J 43768:  driver (1) onto the tone wheel (3).
  4. Using J 43768:  driver (1), press the tone wheel (3) from the 1-2-3-4, 4-5-6 clutch housing (2).
scientia non olet · About LEMON Manuals