D Height Measurement
WARNING: This page is about a different car, the 2009 GMC Sierra, 2009 GMC Cab & Chassis Sierra, 2009 Chevrolet Silverado, and 2009 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
- Jounce the rear suspension of the vehicle by pushing the vehicle down and lifting up.
- Allow the vehicle to settle and take a measurement.
- Measure between the axle bracket and jounce bumper mount bracket as shown in graphic.
- If any of these measurements are out of specifications, inspect for the following conditions:
- Worn or damaged suspension components
- Collision damage