LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1315 (Tires And Wheels) >> Repair Instructions >> Aluminum Wheel Refinishing >> Evaluating Damage

Evaluating Damage

WARNING: This page is about a different car, the 2009 GMC Sierra, 2009 GMC Cab & Chassis Sierra, 2009 Chevrolet Silverado, and 2009 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
  • Inspect the wheel for corrosion, scrapes, gouges, etc. Damage MUST NOT be deeper than what can be sanded or polished off.
  • Inspect the wheel for cracks. If cracks are found, discard the wheel.
  • ALL wheels with bent rim flanges must not be repaired or refinished.
  • The re-machining and the re-clear coating of aluminum wheels is not recommended in the dealer environment due to concerns of repair durability.
  • Do not use any re-machining process that removes aluminum. This could affect the dimensions and function of the wheel.
scientia non olet · About LEMON Manuals