LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1285 (Bumper System And Fascia) >> Repair Instructions >> Front Bumper Impact Bar Outer Reinforcement Replacement (GMC)

Front Bumper Impact Bar Outer Reinforcement Replacement (GMC)

WARNING: This page is about a different car, the 2009 GMC Sierra, 2009 GMC Cab & Chassis Sierra, 2009 Chevrolet Silverado, and 2009 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: View Of Front Bumper Impact Bar Outer Reinforcement (GMC)
GM1828276Courtesy of GENERAL MOTORS CORP.
Callout Component Name

Preliminary Procedures

  1. Remove the front bumper impact bar. Refer to Front Bumper Impact Bar Replacement (Chevrolet)  or Front Bumper Impact Bar Replacement (GMC) .
  2. Remove the front bumper impact bar bracket. Refer to Front Bumper Impact Bar Bracket Replacement (GMC) .
1 Front Bumper Impact Bar Outer Reinforcement Nut
CAUTION: Refer to Fastener Caution .

Tighten:  50 N.m (37 lb ft)

2 Front Bumper Impact Bar Outer Reinforcement Bolt
3 Front Bumper Impact Bar Outer Reinforcement