LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1268 (Engine Mechanical - 4.8L, 5.3L, 6.0L Or 6.2L (3 Of 5)) >> Off-Vehicle Repair Instructions (1 Of 3) >> Engine Front Cover Removal (RPO LY2/LC9/LY5/LMG)

Engine Front Cover Removal (RPO LY2/LC9/LY5/LMG)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Front Cover & Gasket
    GM1704624Courtesy of GENERAL MOTORS CORP.
  1. Remove the front cover bolts (1).
  2. Remove the front cover (2) and gasket (3).
  3. Discard the front cover gasket.
    4. Fig 2: View Of Front Cover, Oil Seal, Camshaft Position Sensor, Bracket & O Ring
    GM1704625Courtesy of GENERAL MOTORS CORP.
  4. Remove the oil seal (4).
  5. Remove the bolts (1, 6), camshaft position (CMP) sensor (2), and wire harness (5).
  6. Remove the O-ring (3) from the sensor, as required.
scientia non olet · About LEMON Manuals