LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 117 (Automatic Transmission Servicing (4L80-E)) >> Removal & Installation >> Auxiliary Oil Cooler >> Installation

Auxiliary Oil Cooler: Installation

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2003 GMC Savana Special, 2003 GMC Savana Camper Special, 2003 GMC Savana, 2003 Chevrolet RV Cutaway, and 2003 Chevrolet Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the oil cooler into the vehicle.
  2. Install the upper bolts into the oil cooler bracket. Tighten the bolts to specification. See TORQUE SPECIFICATIONS  .
  3. Raise the vehicle.
  4. Install the lower bolts to the oil cooler bracket. Tighten the bolts to specification. See TORQUE SPECIFICATIONS  .
  5. Lower the vehicle.
  6. Connect the oil cooler lines to the auxiliary oil cooler.
  7. Attach the oil cooler lines to the push clips in the mounting bracket.
  8. Reinstall the grille assembly.
scientia non olet · About LEMON Manuals