LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1162 (Engine Mechanical - 3.6L (6 Of 6)) >> Off-Vehicle R EPAIR Instructions (4 Of 4) >> Exhaust Manifold Installation - Left Side

Exhaust Manifold Installation - Left Side

WARNING: This page is about a different car, the 2008 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View of Engine Mount Bracket Assembly
    GM945952Courtesy of GENERAL MOTORS CORP.
  1. Install the engine mount bracket.
    2. NOTE: Refer to Fastener Notice .
  2. Install the engine mount bracket bolts.

    Tighten:  Tighten the engine mount bracket bolts to 60 N.m (44 lb ft).

    3. Fig 2: Identifying Left Engine Mount
    GM945941Courtesy of GENERAL MOTORS CORP.
  3. Install the engine mount.
  4. Install the engine mount nut.

    Tighten:  Tighten the engine mount nut to 80 N.m (59 lb ft).

    5. Fig 3: View Of Left Exhaust Manifold
    GM902880Courtesy of GENERAL MOTORS CORP.
  5. Position a NEW exhaust manifold gasket onto the left exhaust manifold.
  6. Install the exhaust manifold bolts into the left exhaust manifold.
  7. Place the left exhaust manifold, exhaust manifold gasket and bolts as an assembly in position on the left cylinder head.
  8. Install the exhaust manifold bolts into the left cylinder head.

    Tighten:  Tighten the exhaust manifold bolts to 25 N.m (18 lb ft).

scientia non olet · About LEMON Manuals