LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1162 (Engine Mechanical - 3.6L (6 Of 6)) >> Off-Vehicle R EPAIR Instructions (4 Of 4) >> Drive Belt Idler Pulley Installation

Drive Belt Idler Pulley Installation

WARNING: This page is about a different car, the 2008 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View of Drive Belt Idler Pulley Assembly
    GM945844Courtesy of GENERAL MOTORS CORP.
  1. Place the drive belt idler pulley in position to the engine front cover.
    2. NOTE: Refer to Fastener Notice .
  2. Install the drive belt idler pulley bolt.

    Tighten:  Tighten the drive belt idler pulley bolt to 50 N.m (37 lb ft).

scientia non olet · About LEMON Manuals