LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1158 (Engine Mechanical - 3.6L (3 Of 6)) >> Off-Vehicle Repair Instructions (1 Of 4) >> Engine Flywheel Removal (Automatic Transmission) >> Removal Procedures

Removal Procedures

WARNING: This page is about a different car, the 2008 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Tool EN 46106
    GM945978Courtesy of GENERAL MOTORS CORP.
  1. Install the EN 46106  through the starter mounting hole. See Special Tools .
    2. Fig 2: View Of Engine Flywheel Assembly
    GM902811Courtesy of GENERAL MOTORS CORP.
  2. Remove the engine flywheel bolts and discard.
  3. Remove the engine flywheel from the crankshaft.
    4. Fig 3: View Of Tool EN 46106
    GM945978Courtesy of GENERAL MOTORS CORP.
  4. Remove the EN 46106  . See Special Tools .
scientia non olet · About LEMON Manuals