Coil Assembly Cleaning and Inspection

WARNING: This page is about a different car, the 2008 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Coil Assembly

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedures Clean all components in solvent and air dry. Inspect components and perform any repair procedure necessary to fix the damage. The coil is serviced as an assembly.
1	Transfer Case Coil Assembly Studs Tip: Inspect the studs and O-rings for damage.
2	Transfer Case Coil Assembly Wires Tip: Inspect the wires and terminals for damage. Repair, as required.

Callout

Component Name

Preliminary Procedures

Clean all components in solvent and air dry.
Inspect components and perform any repair procedure necessary to fix the damage. The coil is serviced as an assembly.

Transfer Case Coil Assembly Studs
Tip: Inspect the studs and O-rings for damage.

Transfer Case Coil Assembly Wires
Tip: Inspect the wires and terminals for damage. Repair, as required.