Vent Assembly, Drain Plug, Fill Plug, and Temperature Switch Installation

WARNING: This page is about a different car, the 2008 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Vent Assembly, Drain Plug, Fill Plug, and Temperature Switch

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
1	Transfer Case Temperature Switch Assembly
2	Transfer Case Oil Drain Plug - Magnetic NOTE: Refer to Component Fastener Tightening Notice . Tip: Apply pipe sealant GM P/N 12346004 (Canadian P/N 10953480) to the drain plug before installation. Tighten: 19-30 N.m (14-22 lb ft)
3	Transfer Case Oil Fill Plug Tip: Apply pipe sealant GM P/N 12346004 (Canadian P/N 10953480) to the fill plug before installation. Fill the transfer case with fluid. Refer to Sealers, Adhesives, and Lubricants and Approximate Fluid Capacities . Tighten: 19-30 N.m (14-22 lb ft)
4	Transfer Case Vent Assembly