Output Shaft Seal (Front): Installation

WARNING: This page is about a different car, the 2003 GMC Savana Special, 2003 GMC Savana Camper Special, 2003 GMC Savana, and 2003 Chevrolet Chevy Express. However, it is still accessible from the selected car via links, so may be relevant.

Using the front output shaft seal installer (2) and the universal handle (1), install the transfer case output seal. See Fig 1.
Install the front propeller shaft. See PROPELLER SHAFT REPLACEMENT - FRONT .
Check the transfer case fluid level. See DRAINING & REFILLING .
Lower the vehicle.

Fig 1: Identifying Front Output Shaft Seal Installer

Courtesy of GENERAL MOTORS CORP.