Repair Procedures
WARNING: This page is about a different car, the 2008 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.
Perform the Diagnostic Repair Verification after completing the diagnostic procedure.
- Fuel Tank Pressure Sensor Replacement
- Fuel Pressure Sensor Replacement (LLT)
- Engine Oil Pressure Sensor and/or Switch Replacement
- Camshaft Position Sensor Replacement - Bank 2 (Left Side) Exhaust (LP1, LY7)
- Camshaft Position Sensor Replacement - Bank 2 (Left Side) Intake (LP1, LY7)
- Camshaft Position Sensor Replacement - Bank 1 (Right Side) Exhaust
- Camshaft Position Sensor Replacement - Bank 1 (Right Side) Intake
- Accelerator Pedal Position Sensor Replacement
- Throttle Body Assembly Replacement
- Crankshaft Position Sensor Replacement
- Air Conditioning (A/C) Refrigerant Pressure Sensor Replacement
- Control Module References for ECM replacement, setup, and programming